Micro OSD (CC3D/Naze32/F3) for 250 Racing Drone
미니 200~3000급에 사용되는 초소형 Micro OSD - 레이싱 쿼드용.
주의 : 본 제품은 Open Source용 OSD 보드로서 별도의 세팅이 필요합니다.(하단 링크 참조)
* Features:
• All the same features as the orignal, but less the half the size
• NO Dc/Dc convert . power board via 5 volts
• FTDI cable compatible pinout
• Standard 6-pin ISP header
• Two LED indicators
• ATmega328P with Arduino bootloader
• MAX7456 monochrome on-screen display
• 16x16MM Size!
• Modifications for direct connection of two batteries (up to 4S)
• Pad for an Analog or Digital PWM RSSI signal
• Pad for the connection of a Current Sensor
• ATmega328P with Arduino bootloader
• Standalone, or with APM/ Flip / Flip32+ flight controllers
• These modifications allow direct connection of two batteries (up to 4S)
• Big thank you to the KV Team and the OSD firmware and the multiwii-osd team
• This hardware take the hardware mods for this firmware, and builds them into an RTF solution.
• This Board can be used just as a normal OSD for APM or it can be used with MWC KV Team Mod .
* Specifications:
• ATmega328P with Arduino bootloader
• MAX7456 monochrome on-screen display
• FTDI cable compatible pinout
• Standard 6-pin ISP header
• Two independent power sections with an LED indicator on each
• Solder jumpers for combining the power sections
• +5V 500mA regulator for up to +12V supply input
• Solder jumper for PAL video option
• Exposed test points for HSYNC and LOS
• Dimensions: 0.7"W x 1.7"L (2.4" w/ pins as shown) x 0.3"H
• MINIMOSD, A MINIMAL ARDUINO-BASED ON-SCREEN DISPLAY BOARD.
세팅 관련 블로그는 아래를 참조 하세요~